Lock nuts requiring a keyway (inch)
Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.
We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.
- skf N 034 Lock nuts requiring a keyway (inch)
- 5.3
- 7318becbm-skf
- skf N 670 Lock nuts requiring a keyway (inch)
- 50 mm
- 55 mm
- skf N 076 Lock nuts requiring a keyway (inch)
- 35 mm
- UL, NSF H1, AFBMA, A
- skf N 032 Lock nuts requiring a keyway (inch)
- 20mm
- Open Type
- skf AN 19 Lock nuts requiring a keyway (inch)
- 2-11/16 in
- Steel
- skf N 072 Lock nuts requiring a keyway (inch)
- Open Type
- Light
- skf AN 21 Lock nuts requiring a keyway (inch)
- 93.7 mm
- 136761
- skf AN 20 Lock nuts requiring a keyway (inch)
- UCFT200
- 1080 lbf
- skf AN 26 Lock nuts requiring a keyway (inch)
- Ambient
- Exceptional Bearing
- skf AN 28 Lock nuts requiring a keyway (inch)
- Leaded-Tin Bronze
- Maximum of +800
- skf N 11 Lock nuts requiring a keyway (inch)
- 3350 RPM
- 80 mm