Lock nuts requiring a keyway (inch)
Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.
We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.
- skf N 10 Lock nuts requiring a keyway (inch)
- Not Rated
- Single Row Non-Fill
- skf AN 24 Lock nuts requiring a keyway (inch)
- 230 mm
- 670 mm
- skf N 800 Lock nuts requiring a keyway (inch)
- Without Snap Ring
- SAE 52100 Steel
- skf AN 22 Lock nuts requiring a keyway (inch)
- Cast Iron
- 7316577415868
- skf N 600 Lock nuts requiring a keyway (inch)
- Standard
- 150mm
- skf N 048 Lock nuts requiring a keyway (inch)
- 1.2500 in
- Black Oxide
- skf N 088 Lock nuts requiring a keyway (inch)
- 2890 lbf
- Cast Iron
- skf N 044 Lock nuts requiring a keyway (inch)
- 0.020 in
- 0.7000 in
- skf N 560 Lock nuts requiring a keyway (inch)
- 0.8750 in
- 4000 lbs
- skf N 040 Lock nuts requiring a keyway (inch)
- HMVC 26E
- 22.479 mm
