Lock nuts requiring a keyway (inch)
Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.
We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.
- skf N 09 Lock nuts requiring a keyway (inch)
- Set Screw
- Non-Expansion Bearin
- skf N 04 Lock nuts requiring a keyway (inch)
- 4500 fpm
- ISO-GARD® Small
- skf AN 32 Lock nuts requiring a keyway (inch)
- NA49
- -25 to +225 &de
- skf N 03 Lock nuts requiring a keyway (inch)
- Static 8000 / D
- Click here
- skf AN 30 Lock nuts requiring a keyway (inch)
- 22317-e1-c3-qbl
- C3
- skf N 01 Lock nuts requiring a keyway (inch)
- Uncoated
- Normal Duty
- skf N 07 Lock nuts requiring a keyway (inch)
- Tapered Adapter
- 8.1250 in
- skf N 06 Lock nuts requiring a keyway (inch)
- Steel
- 9.3437 in
- skf N 05 Lock nuts requiring a keyway (inch)
- 85mm
- 62209-2rsr-fag
- skf AN 38 Lock nuts requiring a keyway (inch)
- Round
- 0.2500 in