Double row self aligning ball bearings
The double-row self-aligning ball bearings are manufactured with cylindrical or tapered bore, the taper ratio being 1:12. The bearings with tapered bore are required to be fitted either onto a shaft with tapered seating on the shaft, or by means of an adapter sleeve onto a cylindrical shaft.In this paper, a three degrees of freedom (dof) model was established for a double-row self-aligning ball bearing (SABB) system, and was applied to study the dynamic behavior of the system during starting process and constant speed rotating process.Single row four-point angular contact ball bearings; Double row angular contact ball bearings; Double row self-aligning ball bearings; Single direction thrust ball bearings; Double direction thrust ball bearings; Cylindrical bearings. Single row cylindrical roller bearings; Single row cylindrical roller bearings.
Double Row Self-Aligning Ball Bearing with Tapered Clamping Sleeve and Nut. The Double Row Self-Aligning ball bearings with Tapered Clamping Sleeve and Nut, are identical to Double Row Self-Aligning ball bearings except that these have a tapered bore, which is used for easier mounting and also a clamping sleeve and nut to clamp the bearings.
- 90 mm x 190 mm x 64 mm NTN 2318SKC3 Double row self aligning ball bearings
- 4.0000 in
- Cast Iron
- 85 mm x 180 mm x 60 mm NTN 2317SKC3 Double row self aligning ball bearings
- 1.3900 in
- Standard Duty
- 75,000 mm x 160,000 mm x 55,000 mm SNR 2315 Double row self aligning ball bearings
- 75,000 mm x 160,000 mm x 55,000 mm
- 70 mm x 150 mm x 51 mm NTN 2314S Double row self aligning ball bearings
- MIL-B-5687C Type I C
- None
- 65 mm x 140 mm x 48 mm NTN 2313SKC3 Double row self aligning ball bearings
- 10-1/4 in
- 79100 lb