Lock nuts requiring a keyway (inch)
Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.
We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.
- skf AN 18 Lock nuts requiring a keyway (inch)
- Adapter Mount
- 113000 lbs
- skf AN 17 Lock nuts requiring a keyway (inch)
- 50000
- 0.018 lb
- skf AN 16 Lock nuts requiring a keyway (inch)
- 169.875 mm
- 4.763 mm
- skf AN 15 Lock nuts requiring a keyway (inch)
- 0.02 KGS
- 63.5mm
- skf N 44 Lock nuts requiring a keyway (inch)
- 0.5800 in
- 1.0000 in
- skf N 00 Lock nuts requiring a keyway (inch)
- 19000 RPM
- C0
- skf N 710 Lock nuts requiring a keyway (inch)
- Adapter Sleeve
- 208
- skf N 038 Lock nuts requiring a keyway (inch)
- 1.7500 in
- 49900 lb
- skf N 950 Lock nuts requiring a keyway (inch)
- 1-25/64 in
- 2-3/4 in
- skf N 630 Lock nuts requiring a keyway (inch)
- Non-Expansion Bearin
- PN-39T
- skf N 036 Lock nuts requiring a keyway (inch)
- Uncoated
- 0.8348 in
- skf N 750 Lock nuts requiring a keyway (inch)
- 0.01 KGS
- Steel