Double row self aligning ball bearings
The double-row self-aligning ball bearings are manufactured with cylindrical or tapered bore, the taper ratio being 1:12. The bearings with tapered bore are required to be fitted either onto a shaft with tapered seating on the shaft, or by means of an adapter sleeve onto a cylindrical shaft.In this paper, a three degrees of freedom (dof) model was established for a double-row self-aligning ball bearing (SABB) system, and was applied to study the dynamic behavior of the system during starting process and constant speed rotating process.Single row four-point angular contact ball bearings; Double row angular contact ball bearings; Double row self-aligning ball bearings; Single direction thrust ball bearings; Double direction thrust ball bearings; Cylindrical bearings. Single row cylindrical roller bearings; Single row cylindrical roller bearings.
Double Row Self-Aligning Ball Bearing with Tapered Clamping Sleeve and Nut. The Double Row Self-Aligning ball bearings with Tapered Clamping Sleeve and Nut, are identical to Double Row Self-Aligning ball bearings except that these have a tapered bore, which is used for easier mounting and also a clamping sleeve and nut to clamp the bearings.
- 75 mm x 160 mm x 55 mm NTN 2315SKC3 Double row self aligning ball bearings
- Right Hand
- 0.2500 in
- 75 mm x 160 mm x 55 mm NTN 2315SC3 Double row self aligning ball bearings
- Dry 0.50, Periodic L
- Dry 0.15;Period
- 75 mm x 160 mm x 55 mm SNR 2315KC3 Double row self aligning ball bearings
- 2.3125 in
- 2.4375 in
- 85 mm x 180 mm x 60 mm NTN 2317SC3 Double row self aligning ball bearings
- Chrome Steel
- 35 mm
- 80 mm x 170 mm x 58 mm NTN 2316SKC3 Double row self aligning ball bearings
- 7/16-20
- Needle Rollers
- 80 mm x 170 mm x 58 mm NTN 2316S Double row self aligning ball bearings
- Medium
- 7008a5trdump3-nsk
- 80 mm x 170 mm x 58 mm NTN 2316SC3 Double row self aligning ball bearings
- Without Snap Ring
- CN