Double row self aligning ball bearings
The double-row self-aligning ball bearings are manufactured with cylindrical or tapered bore, the taper ratio being 1:12. The bearings with tapered bore are required to be fitted either onto a shaft with tapered seating on the shaft, or by means of an adapter sleeve onto a cylindrical shaft.In this paper, a three degrees of freedom (dof) model was established for a double-row self-aligning ball bearing (SABB) system, and was applied to study the dynamic behavior of the system during starting process and constant speed rotating process.Single row four-point angular contact ball bearings; Double row angular contact ball bearings; Double row self-aligning ball bearings; Single direction thrust ball bearings; Double direction thrust ball bearings; Cylindrical bearings. Single row cylindrical roller bearings; Single row cylindrical roller bearings.
Double Row Self-Aligning Ball Bearing with Tapered Clamping Sleeve and Nut. The Double Row Self-Aligning ball bearings with Tapered Clamping Sleeve and Nut, are identical to Double Row Self-Aligning ball bearings except that these have a tapered bore, which is used for easier mounting and also a clamping sleeve and nut to clamp the bearings.
- 60 mm x 130 mm x 46 mm SNR 2312C3 Double row self aligning ball bearings
- Lubrication Fitting
- Round
- 45,000 mm x 100,000 mm x 36,000 mm SNR 2309G15 Double row self aligning ball bearings
- Uncoated
- Chrome Steel
- 45,000 mm x 100,000 mm x 36,000 mm SNR 2309EEG15 Double row self aligning ball bearings
- Alloy Steel Heat Tre
- Carbon Steel
- 40 mm x 90 mm x 33 mm NTN 2308SKC3 Double row self aligning ball bearings
- Phenolic Resin
- Not for Ball Screws
- 40 mm x 90 mm x 33 mm NTN 2308SC3 Double row self aligning ball bearings
- Plain Sleeve
- -40 to +662 &de
- 40 mm x 90 mm x 33 mm SNR 2308KG15C3 Double row self aligning ball bearings
- Uncoated
- Skwezloc Collar