Double row self aligning ball bearings
The double-row self-aligning ball bearings are manufactured with cylindrical or tapered bore, the taper ratio being 1:12. The bearings with tapered bore are required to be fitted either onto a shaft with tapered seating on the shaft, or by means of an adapter sleeve onto a cylindrical shaft.In this paper, a three degrees of freedom (dof) model was established for a double-row self-aligning ball bearing (SABB) system, and was applied to study the dynamic behavior of the system during starting process and constant speed rotating process.Single row four-point angular contact ball bearings; Double row angular contact ball bearings; Double row self-aligning ball bearings; Single direction thrust ball bearings; Double direction thrust ball bearings; Cylindrical bearings. Single row cylindrical roller bearings; Single row cylindrical roller bearings.
Double Row Self-Aligning Ball Bearing with Tapered Clamping Sleeve and Nut. The Double Row Self-Aligning ball bearings with Tapered Clamping Sleeve and Nut, are identical to Double Row Self-Aligning ball bearings except that these have a tapered bore, which is used for easier mounting and also a clamping sleeve and nut to clamp the bearings.
- 55 mm x 120 mm x 43 mm NTN 2311SK Double row self aligning ball bearings
- Cast Iron
- Set Screw
- 30,000 mm x 72,000 mm x 27,000 mm SNR 2306EEG15 Double row self aligning ball bearings
- Piloted Flange
- 30,000 mm x 72,000 mm x 27,000 mm
- 55 mm x 120 mm x 43 mm SNR 2311KG15C3 Double row self aligning ball bearings
- 0.6250 in
- 3000 RPM
- 55 mm x 120 mm x 43 mm SNR 2311KC3 Double row self aligning ball bearings
- Single Cup
- 053893474717
- 30 mm x 72 mm x 27 mm NTN 2306SK Double row self aligning ball bearings
- 1.3125 in
- 5.5000 in