BEARINGS(UK)LTD.

Double row spherical roller bearings

Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.The separable components of SKF double row cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections. High speed capability The cage designs are suitable for high speeds, rapid accelerations and peak loads.

Bearings without a cage incorporate a maximum number of rollers. Therefore, and because of their second row of rollers, double row full complement cylindrical roller bearings are suitable for very heavy radial loads. High stiffness The increased number of rollers increases radial stiffness. Double - row bearings handle thrust loads in both directions. Open bearings dissipate heat more efficiently than shielded and sealed bearings. Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

160 mm x 290 mm x 80 mm SNR 22232.EMW33 Double row spherical roller bearings: C1 : 6.5 mm; Db max. : 83 mm

170,000 mm x 310,000 mm x 86 mm SNR 22234EMKW33 Double row spherical roller bearings: Dynamic (Ca) : 304 kN; r1s (min) : 2.5 mm

170 mm x 310 mm x 86 mm SNR 22234.EMKW33C3 Double row spherical roller bearings: Labyrinth ring : 2 x LOR 121; ba : 61.119 mm

160 mm x 290 mm x 80 mm SNR 22232.EMW33C3 Double row spherical roller bearings: d : 45.000 mm; Basic Static Radial Load Rating Co : 55000 N

160 mm x 290 mm x 80 mm SNR 22232.EMKW33C4 Double row spherical roller bearings: Limiting speed : 2800 r/min; b : 8.3 mm

160 mm x 290 mm x 80 mm SNR 22232.EMKW33C3 Double row spherical roller bearings: Coefficient of friction µ min. : 0.08; D : 270 mm

160 mm x 290 mm x 80 mm SNR 22232.EAW33C4 Double row spherical roller bearings: D : 47.0000 mm; Grease Speed Rating n1 : 11000 rpm

160 mm x 290 mm x 80 mm SNR 22232.EAW33C3 Double row spherical roller bearings: B : 60.00 mm; Fillet Radius ra : 3.00 mm

160 mm x 290 mm x 80 mm SNR 22232.EAW33 Double row spherical roller bearings: Max. speed for Taconite seal : 460 r/min; R1 : 114.3 mm

150 mm x 270 mm x 73 mm SNR 22230EMW33C4 Double row spherical roller bearings: Mass bearing pair : 1.22 kg; T : 46 mm

160 mm x 290 mm x 80 mm SNR 22232.EMKW33 Double row spherical roller bearings: J max. : 222.25 mm; Basic dynamic load rating C : 193 kN

160 mm x 290 mm x 80 mm SNR 22232.EAKW33C3 Double row spherical roller bearings: L : 539.75 mm; Cap bolt recommended tightening torque : 203.4 N·m