Inch Tapered Bore Mounting Pillow Block SAF230K and SDAF230K Series
Pillow Block Bearings with tapped base are designed for radial loads acting in the direction of the support surface. Pillow Block Bearings are made with one-piece cast iron housing and set screw locking. Tritan Pillow Block Bearings with tapped base are available in two dynamic load.
Pillow-block bearings are a type of mounted bearing that consists of a bearing embedded in a housing that usually resembles a camel’s hump or a mantelpiece clock. Pillow-block bearings are frequently used for applications involving high rotational speeds, radial loads, and minimal axial (thrust) loads.Bearings with bore diameters up to 80 mm (d ≤ 80 mm), can be driven up onto a tapered seat using either a bearing fitting tool or, preferably, a lock nut. For adapter sleeves, use the sleeve nut that can be tightened with a hook or impact spanner.
- 5.188 Inch | 131.775 Millimeter x 2.3750 in x 18.3750 in timken SAF 23030K Inch Tapered Bore Mounting Pillow Block SAF230K and SDAF230K Series
- 5.188 Inch | 131.775 Millimeter x 2.3750 in x 18.3750 in
- timken SAF 23056K 10 Inch Tapered Bore Mounting Pillow Block SAF230K and SDAF230K Series
- Uncoated
- Non-Expansion Bearin
- timken SAF 23044K 8 Inch Tapered Bore Mounting Pillow Block SAF230K and SDAF230K Series
- 0.6900 in
- Contact/Lip