Insert bearings with grub screws for high temperature applications
Insert bearings with grub screws + are suitable for applications for both constant and alternating directions of rotation are locked onto the shaft by tightening the two cup point hexagonal grub (set) screws, positioned 120° apart in the inner ring.Bearing Out Width (C) 14mm Y-bearings with grub screws in the inner ring are locked in position on the shaft by tightening the two cup point hexagonal grub screws, positioned 120° apart. These bearings are suitable for applications where the direction of rotation is constant or alternating.
Insert Bearings with a Snap Ring has two set screws for the attachment to the shaft. The SER200 Series Insert Bearing with a Snap Ring has a Cylindrical Outer or parallel outer diameter and comes to the exact fit of a snap ring. There are also two grub screws which allows it to tighten against the shaft once it is fitted properly.
- 40 mm x 80 mm x 49.2 mm skf YAR 208-2FW/VA201 Insert bearings with grub screws for high temperature applications
- Double
- Bearings with Housin