Lock nuts requiring a keyway (inch)
Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.
We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.
- skf N 530 Lock nuts requiring a keyway (inch)
- 750 fp/min
- 717905067020
- skf AN 36 Lock nuts requiring a keyway (inch)
- 717905065606
- 1-3/4 in
- skf N 052 Lock nuts requiring a keyway (inch)
- RoHS, ASTM B438 Grad
- 6-1/2 in
- skf N 850 Lock nuts requiring a keyway (inch)
- 4.0000 in
- Non-Expansion Bearin
- skf N 056 Lock nuts requiring a keyway (inch)
- 0.11 lb
- 4000 psi
- skf N 096 Lock nuts requiring a keyway (inch)
- 662864717885
- 0.7500 in
- skf N 14 Lock nuts requiring a keyway (inch)
- Precision
- Steel
- skf N 13 Lock nuts requiring a keyway (inch)
- Straight
- (2) Outer
- skf N 12 Lock nuts requiring a keyway (inch)
- Non-Expansion Bearin
- Click here
- skf N 900 Lock nuts requiring a keyway (inch)
- Cast Iron
- Solid Pillow Block